Error Messages

2. Errors related to Files

2.1 “File Open Error”

Cause:

The file could be damaged.

Solution:

Reinstall the JELDATA3.
If the error occurred in the data file, the file can not be recovered.

2.2 “File Read Error”

Cause:

(1) Read the data file of the different robot from the setting at the [Controller Setup].
Read the data file that was saved in a different controller setting from the current setting.
(2) The contents of the data file are changed incorrectly.
(3) If an error occurs while [Data Initialization] is executing, the JELDATA3 system file can be changed or damaged.

Solution:

(1) Read the data file of the robot that is selected at the [Controller Setup].
(Refer to “8.1 Controller Setup" of the JELDATA3 Operation Manual”.)
When the data file is correct, select the right robot at [Setup] →[Controller Setup] from the menu.
(2) Restore the data to the original state.
(3) Reselect the robot at [Setup] →[Controller Setup] from the menu.
(Refer to “8.1 Controller Setup" of the JELDATA3 Operation Manual”.)

2.3 “File Write Error”

Cause:

Disc space is not enough to save the data file.

Solution:

Save the data after making enough disk space.

---

---

[an error occurred while processing this directive]